014-1061-030 - Follower plate for pumps with shank 30 mm subgroup-Dubbelwerkende pneumatische oliepompen De vetpomp heeft een ratio

De vetpomp heeft een ratio van 60:1

filling of central distribution plants

The operating pressure may vary between a minimum of 3 bar and a maximum of 8 bar

De opbrengst is variabel omdat dit afhangt van de hoeveelheid lucht welke wordt gebruikt

Suitable for high pressure transfer of high viscosity grease and fluids over short and long distances and for central distribution plants with multiple distribution points

014-1061-030 - Follower plate for pumps with shank 30 mm subgroup-Dubbelwerkende pneumatische oliepompen De vetpomp heeft een ratioIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.