Dinghy Boomstrut Emergency Response Boat moisture and grease

moisture and grease

Optimized hull design

The hull shape is especially important as it can get a large load on the plane as well as give the pilot unsurpassed manoeuvrabilty in various and dangerous conditions

they have been tested on multiple sites and applications for many years

Width W: 19mm Height: 24mm Width X: 11mm Fastenings Ø: 5mm Fastening centres: 100mm Plunger hole centres: 50mm Weight: 479 g per M

Dinghy Boomstrut Emergency Response Boat moisture and greaseThe Barton Dinghy Boomstrut is designed for sailboats under 5 metres (17) with boom and sail tip weight of under 6. 8 kgs(16 lbs). We recommend, after reading the instructions fully, that you should install the complete system, then determine if the rods require cutting. This would mean the boom position may not be correct but will allow you to measure the downward force required (with sail flaked) on the aft end of the boom to flex the rods.